Car Keyless Entry Engine Start Vibration Alarm System Push Button Remote Starter

Description：

( main function)：

One key start Remote start
Oil pump testing Horn tip
Keyless entry Induction lock car
Driving padlock Flameout unlock
Mute lock the car The alert indicator
Flash output Remote control tail box
Emergency release Handbrake Detection
Foot brake detection The door to detect
Dual path control Original car upgrade
*Vibration alarm*

Details：

1、Manual operation shut (manual lock the car)
Operation: short press remote shut. the car locked and the lights flash horns 1 at a time.
Note: the manual lock the car when should stand in the induction distance. otherwise the door will open automatically after the lock the car.
2、Manually unlock operation (manual)
Operation: short press unlock button once. the car will immediately unlock. lights flashing three times at this time.
Note: manual unlock after the horn is not ring. and only three flash lights. pay attention to when using.
3、Remote control to open the tail box operation (tail box mode)
The remote control to open the trunk mode: long press unlock button for 5 seconds to open the trunk.
4、Remote control car operation (vehicle model)
Find car model: short press for the remote control car keys (middle) can be 15 seconds for the car.
5、 Remote start and remote flameout operation (long started in the remote control)
Remote start oper ation: when the manual or automatic induction makes the car after car anti-the ft lock into the state. long press 5seconds (car keys) don' t let go. the car will automati cally
into the remote start mode. remote start after the success of the operation. after the success of
the remote start horns. 2 light shining 2 times.
Note:
1. The remote start to pick up good pump line can be normal use. otherwise unable to start the vehicle.
2. Remote startup will first gear (manual) to hang in the neutral position.
3. After the success of the remote start the car will have 15 minutes to run regularly . shut down after 15 minutes.
Remote flameout operation: when want t o remote flameout vehicles in 15 minutes. is long in search of the remote control car key for 5seconds don' t let go. shut down after the vehicle automatic into the securily state
6、Induction shut + unlock operation (induction open close)
Operation: when. take the remote control out of the car will automatically lock the car approached the car will automatically unlock.
7、The use of the dual control instructions (dual control)
Description: 6 line control can direct welding the original car remote control; 2 line control can control the original car.
8、Car emergency transport instructions (emergency)
Operation: when the two remote control of the car after the lost or damaged. now want to vehicles according to the following operation method. using keys to open doors. long pres remove switch for 5senconds to remove sencurity
9、Remote learning instructions (remote control code)
Operation : under the lift its state of guard against theft . short press the red to code switch 1seconds after let go . the long turn signal light . short press unlock button once again
10、 Power saving mode (power saving mode)
In the host system to guard against theft w ith in 48 hours. if no remote control operation with in fourty- eight hours. 48 hour s after the system will automati cally cancel the automatic induction mode. cancel induction mode can only be used after lifted manually. press the remote control to switch lock anti -theft . etc.
1 1、The function of the oil pump test line (pump)
1、Akey to start the pump line don't pick up a key to start properly . pay aCar Keyless Entry Engine Start Vibration Alarm System Push Button Remote Starter