DC 12V Electric Diesel Oil & Fuel Transfer Extractor Pump Motor Scavenge Suction

Features:

• Application: Widely used in general industrial equipment. medical equipment. chemical equipment. shipbuilding. drinks. carpet and floor cleaning. water purification and water treatment equipment. vehicle cleaning. agricultural spraying. zo pipeline pressure. air cleaning cooling. coal and metallurgical industries
• Note: If you want to connect this pump to AC power. you will need a power converter
• How to use: Start to run the car engine for a while. when oil temperature turns to be about 50 degrees. start pumping oil
• Connect the pump to the power. run it for a while. and observe whether the inlet and outlet is normal
• Open the filler cap.get dipstick out. force the tube into the bottom of the joint. until the tube does not move
• then put the inlet pipe from the oil dipstick into in end (the tube into the bottom of the tank. the bottom concave place. in order to pump the oil completely)
• as no oil or pumping up very slowly or intermittently. it is generally caused by loose pipes and fittings. You have to install the pipes and fittings again.)
• After oil pumping. remove the tube. and then run the pump for a while. pump the remaining oil inside the pumping clean. or pump water for a while until the pump head gets clean
• If you have not used it for a long time. it may have no suction. then just pour the water in the pump. and run the pump for a few minutes until the air is all out

Specification:

Rated Voltage: DC 12V

Rated Power: 60W

Maximum Flow: 5L/min

Maximum Pressure: 0.8MPA

Pump Diameter: Approx. 4.8cm / 1.89inch

Length: Approx. 14.5cm / 5.7inch

Cable Length: Approx. 30cm / 11.8inch

Clips Length: Approx. 8cm / 3.15inch

Outlet PVC pipe Length:150cm

Nylon pipe Length:100cm

5mm pipe Length:70cm

Color:as picture show

What is included:

1x Oil Pump

1x 11mm Outlet PVC pipe

1x 6mm Nylon pipe

1x 5mm pipe

• Electric Diesel Oil & Fuel Transfer Extractor Pump Motor Scavenge Suction
• Widely used in general industrial equipment. medical equipment. chemical equipment. shipbuilding. drinks. carpet and floor cleaning. water purification and water treatment equipment. vehicle cleaning. agricultural spraying. zo pipeline pressure. air cleaning cooling. coal and metallurgical industries
• The advantage of the plastic tube relative to the copper tube is that it is more resistant to high temperatures and has high applicability.