Fortin OEM Plug & Play T-Harness Remote Start Car Start System for Rogue Altima

THIS IS FOR A FULL REMOTE STARTING KIT - INCLUDES THE FLASHLINK4 WHICH IS REQUIRED TO FLASH THE MODULE!  

Start your car with your OEM remote by pushing the lock button 3x

Easy to install T-harness solution*

This kit INCLUDES the Fortin program cable to set this up for your vehicle and the features you want!

Remote start your vehicle — precool in summer. preheat in winter

Choosing the right remote start system and installing it in your vehicle has become a lot simpler and more affordable with this all-in-one Fortin EVO-Series package. The EVO-NIST1 system includes a digital interface module. which bypasses your vehicle's immobilizer circuits so you can start it without a key. and a T-harness that'll connect the module to your specific vehicle.
Vehicle-specific harness simplifies the installation

While not quite plug-and-play. the harness connections cut down installation time considerably. so you do-it-yourselfers out there can save a little money. Fortin includes a code on the package that you use on their website to download and print detailed. illustrated instructions for your installation.
Use your factory remote

You start your vehicle by pressing the lock button on your factory key three times. This system lets you start your car from as far away as the key will lock and unlock your doors.
Optional RF remotes increase the range to 3500 feet

If you want to be able to start your car from inside your home or office. for instance. you can extend the range of your EVO-NIST3 up to a quarter mile by simply plugging in one of these RF remote kits to the interface module.



EVO-ALL Features:

3x on-board LEDs for simplified programming and diagnostics.
1x preloaded firmware for maximum compatibility.
4-wire Fortin 2-way datalink port for data-to-data (RS-232) communication with datalink equipped remote-starters and security-systems.
20-wire general purpose plug for wire-to-wire connections with non-datalink equipped remote-starters and security-systems
Self-Learning algorithm automatically detects the vehicle during programming and adjusts accordingly

Communication Ports

3x CAN-Bus controllers.
3x General purpose controllers (J1850. Class 2. encrypted key etc.).
2x On-board Relays (SPDT).
1x Analog Controller 0-12VDC @ 20mV steps (Passlock. MUX).
1x TB control port for TB-series modules

Parts included

1 x EVO-ALL control module
1 x Warning label.
1 x 20 Pin general purpose harness.
1 x 4 Pin Fortin 2-way data-link harness.
THAR-NIS3 T-Harness

Program Cable Features:

Firmware Update Tool For All Fortin Digital Modules
Customization features and module options from FLASH-LINK menu
Simple point-and-click enable or disable functionality
Disable the following features enabled by default:
Door Locks
Trunk Release
Key Bypass
Heated Seats & Rear Defrost
Foot-Brake Output
Hand-Brake Output
Door Trigger
Trunk Trigger
Hood Trigger
Auxiliary 1
Auxiliary 2
Enable the following features disabled by default:
Unlock/Lock (Disarm OEM Alarm)
Unlock Drivers Door Only
Aftermarket alarm control via OEM remote
Engine-Start via OEM remote
No internet required to disable or enable a feature


** T-Harness may not complete installation and some wires may need to be hard wired into vehicle similar to a typical car starter install.
** Check manufactorers web site to make sure your vehicle is comatible with this systemFortin OEM Plug & Play T-Harness Remote Start Car Start System for Rogue Altima