Rockville ATOM P60 4800 Watt Peak/1200w RMS 2 Channel Marine/Boat Amplifier Amp

VIDEO OF ATOM P60:

Features:
Rockville ATOM P60 4.800 Watt Peak and 1200 Watt RMS Class D 2 Ohm Car Stereo Amplifier Dyno certified RMS Power (less than 1 % distortion) (Use these ratings when comparing with other premium brands such as Kicker. Rockford Fosgate. etc)
2 Ohm: 600 Watts x 2 Channel <1% THD+N @ 14.4 Volts
4 Ohm: 360 Watts x 2 Channel <1% THD+N @ 14.4 Volts
4 Ohm Bridged: 1200 Watts x 1 Channel <1% THD+N @ 14.4 Volts
Peak Power: (Use these ratings when comparing with great budget brands such as Boss. Power Acoustik. Crunch. etc)
2 Ohm: 2400 Watts x 2 Channel
4 Ohm: 1440 Watts x 2 Channel
4 Ohm Bridged: 4800 Watts x 1 Channel
Digital Voltage Display on Amp
Adjustable Low Pass Filter: 50Hz - 250Hz
Adjustable High Pass Filter: 50Hz - 250Hz
Painted Conformal Coating PCB Board (Uses 2577 Waterproof Glue)
Rustproof Aluminum heat sink with black hairline finish
Stainless steel end panels are rustproof
All screws and mounting hardware are stainless steel and rustproof
Bottom panel is aluminum and rustproof
4 Gauge power and ground terminals
10 Guage speaker wire temrinals
All channels on the amp have crossovers so they can each be used for subs or full range speakers or tweeters or midrange speakers
All channels on the amplifier are bridgeable
High-Speed MOSFET Power Supply
Under Voltage Protection at 10V
Over Voltage Protection at 16V
Tertiary Supplies Circuitry
Studio-Grade Bipolar Output Stage Transistors
Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
Full IC-Controlled Protection Circuitry
Fully Adjustable 12dB Bass Equalizer
Adjustable Input Level Control
Mute and Delay Soft Start System
8 Volt Preamp Circuitry
Status Mode LED Indicator
Minimum THD at Rated Power: < 0.05%
S / N Ratio: >90dB
Frequency Response: 10Hz - 30KHz
Damping Factor: >85 @ 100Hz
40 Amp x 3 ATC Fuse
Dimensions: (Lx W x H) 12.4 x 6.7 x 2.0
 

Owner's Manual

• What's in the Box: Amplifier. Birth sheet with Dyno-tested power. Mounting Screw Kit. Owner's manual. Warranty
• Features: Rockville ATOM P60 4.800 Watt Peak and 1200 Watt RMS Class D 2 Ohm Car Stereo Amplifier Dyno certified RMS Power (less than 1 % distortion) (Use these ratings when comparing with other premium brands such as Kicker. Rockford Fosgate. etc). 2 Ohm: 600 Watts x 2 Channel <1% THD+N @ 14.4 Volts. 4 Ohm: 360 Watts x 2 Channel <1% THD+N @ 14.4 Volts. 4 Ohm Bridged: 1200 Watts x 1 Channel <1% THD+N @ 14.4 Volts.
• Peak Power: (Use these ratings when comparing with great budget brands such as Boss. Power Acoustik. Crunch. etc). 2 Ohm: 2400 Watts x 2 Channel. 4 Ohm: 1440 Watts x 2 Channel. 4 Ohm Bridged: 4800 Watts x 1 Channel. Digital Voltage Display on Amp. Adjustable Low Pass Filter: 50Hz - 250Hz. Adjustable High Pass Filter: 50Hz - 250Hz. Painted Conformal Coating PCB Board (Uses 2577 Waterproof Glue).
• Rustproof Aluminum heat sink with black hairline finish. Stainless steel end panels are rustproof. All screws and mounting hardware are stainless steel and rustproof. Bottom panel is aluminum and rustproof. 4 Gauge power and ground terminals. 10 Guage speaker wire temrinals. All channels on the amp have crossovers so they can each be used for subs or full range speakers or tweeters or midrange speakers. All channels on the amplifier are bridgeable.
• High-Speed MOSFET Power Supply. Under Voltage Protection at 10V. Over Voltage Protection at 16V. Tertiary Supplies Circuitry. Studio-Grade Bipolar Output Stage Transistors. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Full IC-Controlled Protection Circuitry. Fully Adjustable 12dB Bass Equalizer. Adjustable Input Level Control. Mute and Delay Soft Start System. 8 Volt Preamp Circuitry. Status Mode LED Indicator.