Rockville RXM-S30 Micro Marine/ATV Amplifier 2400w Max 4 Channel 4x150w RMS Dyno-Certified

Videos of RXM-S30:

Features:

• Rockville RXM-S30 2400w / 600w Dyno-Certified RMS 4 Channel Proton Micro Marine Car Amplifier
• Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker. Rockford Fosgate. etc)
• 400 Watts (4 x 90 Watts) at 4 ohms and 1% THD+N
• 600 Watts (4 x 150 Watts) at 2 ohms < 1% THD
• 600 Watts (2 x 300 Watts) bridged @ 4 Ohms < 1% THD
• Peak: (Use these ratings when comparing with the top budget brands such as Boss. Power Acoustik. etc):
• 2400 Watts (2 x 1200 @ 2 ohms or 1 x 2400 @ 4 Ohms)
• Marine amplifier with conformal coated PCB board
• High-Speed MOSFET Power Supply
• Studio-Grade Bipolar Output Stage Transistors
• Double Sided Surface Mount (SMD) PCB Design
• Selectable +6dB/+12dB Bass Equalizer @ 45hz
• Channel Separation: 50 dB
• Current drawn @ MAX RMS output: 27A @ 4ohm. 40A @ 2ohm
• Efficiency @ MAX RMS output: 65% @ 4ohm. 60% @ 2ohm
• 2-Ohm Stable Stereo
• 4-Ohm Mono Bridgeable
• 3 Channel Mixed-Mono Capable
• Input sensitivity: 20mV-6V
• Mute and Delay Soft Start System
• Full IC-Controlled Protection Circuitry
• 2 CH / 4 CH Input Mode Switch
• RCA Preamp Line Output
• 8 Volt Preamp Circuitry
• Status Mode LED Indicator
• 4 Gauge Lucite Encapsulated Power/Ground Terminals
• 12 Gauge Lucite Encapsulated Speaker Terminals
• THD+A: 0.01%
• Frequency Response: 15Hz - 20KHz
• Continuously Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
• Continuously Fully Adjustable High Pass Crossover: 50HZ – 250HZ
• CH1 & CH2 High Pass 50Hz - 250Hz
• CH3 & CH4 Low Pass 50Hz - 250Hz
• CH3 & CH4 High Pass 50Hz - 250Hz
• Full Adjustable Crossover Controls: low pass. high pass. and full pass
• Sensitivity: 100dB @ 1w / 1m
• S/N Ratio: >90dB
• &l

• Rockville RxM-S30 2400w / 600w Dyno-Certified RMS 4 Channel Proton Micro Marine Car Amplifier.
• Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker. Rockford Fosgate. etc). 400 Watts (4 x 90 Watts) at 4 ohms and 1% THD+N. 600 Watts (4 x 150 Watts) at 2 ohms < 1% THD. 600 Watts (2 x 300 Watts) bridged @ 4 Ohms < 1% THD. Peak: (Use these ratings when comparing with the top budget brands such as Boss. Power Acoustik. etc): 2400 Watts (2 x 1200 @ 2 ohms or 1 x 2400 @ 4 Ohms).
• Marine amplifier with conformal coated PCB board. High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors. Double Sided Surface Mount (SMD) PCB Design. Selectable +6dB/+12dB Bass Equalizer @ 45hz. Channel Separation: 50 dB. Current drawn @ MAx RMS output: 27A @ 4ohm. 40A @ 2ohm. Efficiency @ MAx RMS output: 65% @ 4ohm. 60% @ 2ohm. 2-Ohm Stable Stereo. 4-Ohm Mono Bridgeable. 3 Channel Mixed-Mono Capable.
• Input sensitivity: 20mV-6V. Mute and Delay Soft Start System. Full IC-Controlled Protection Circuitry. 2 CH / 4 CH Input Mode Switch. RCA Preamp Line Output. 8 Volt Preamp Circuitry. Status Mode LED Indicator. 4 Gauge Lucite Encapsulated Power/Ground Terminals. 12 Gauge Lucite Encapsulated Speaker Terminals. THD+A: 0.01%. Frequency Response: 15Hz - 20KHz. Continuously Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Continuously Fully Adjustable
• High Pass Crossover: 50HZ - 250HZ. CH1 & CH2 High Pass 50Hz - 250Hz. CH3 & CH4 Low Pass 50Hz - 250Hz. CH3 & CH4 High Pass 50Hz - 250Hz. Full Adjustable Crossover Controls: low pass. high pass. and full pass. Sensitivity: 100dB @ 1w / 1m. S/N Ratio: >90dB. Damping Factor: > 200 @ 100Hz. 2 x 30A Fuses. 7 LBS. Dimensions: (W x H x L) 6.7 x 1.98 x 12.28